Bifacial Solar Panels – Capture More Sunlight
Get more from the sun with bifacial solar panels. By capturing direct sunlight on the front and reflected light on the rear, these panels can generate more electricity than comparable single-sided panels. Their additional energy output depends on panel positioning, mounting height and the reflectivity of surrounding surfaces. With the right installation, bifacial technology helps maximise solar generation and delivers more energy from your available space.
Bifacial solar panels generate electricity from both sides: the front captures sunlight, while the rear captures light reflected from the roof, ground and surrounding surfaces. This can increase energy production compared with a panel that collects light only from the front. Panasonic New Zealand
Anchor’s bifacial range includes N-type TOPCon cells and dual-glass construction. For example, its published 570–590 W series offers:
| Feature | Published specification |
|---|---|
| Rated panel output | 570–590 W under standard test conditions |
| Module efficiency | 22.1–22.8%, depending on model |
| Construction | 144 half-cell, N-type TOPCon, dual-glass bifacial |
| Temperature coefficient | −0.29% per °C above the reference cell temperature |
| Product warranty | 15 years |
| Performance warranty | 30 years, subject to warranty terms |
These figures apply to that specific series; the model supplied in New Zealand should be checked against its own datasheet and local warranty. panasonic.com
For homes, high module efficiency helps make productive use of available roof space. However, the additional benefit from the rear surface depends on the installation. Panels mounted close to a roof with little reflected light reaching the underside may gain relatively little from being bifacial.
For commercial installations, elevated arrays, suitable flat-roof layouts and ground-mounted systems can offer better opportunities for rear-side generation. Reflective surfaces, panel clearance, tilt, row spacing and shading all affect the result. These factors should be included in the system’s energy forecast. NLR
Panel efficiency and bifacial gain are different measurements. A module efficiency of 22.8% describes conversion of sunlight into electricity under specified test conditions. Bifacial gain is the additional output contributed by rear-side light—it is site-dependent and should not be advertised as a guaranteed percentage increase for every installation.


